Details
Beaver DHC-2 ARF 1650 mm - VQ Models
Our DHC Beaver was developed specifically for brushless electric drives and has a cockpit that can be completely removed upwards for easy battery changes.
The Beaver shines with many other innovative features. The hood is not screwed to the fuselage but snaps onto the fuselage magnetically.
An internal combustion engine can also be installed on request.
With the large, included wheels, take-offs and landings are no problem even on unpaved runways.
The model is also very suitable for water flying or winter flying on snow; you can find suitable floats for this in our range.
Features:
* ARF finished model in wood construction (laser cut)
* Covered with printed, highly detailed film
* 2-part wing. removable with aluminum tube connector
* Cabin glazing completely installed at the factory
* Windscreen and frame can be removed magnetically upwards
* GRP engine hood with magnetic attachment, ready painted
* Stable aluminum chassis
* Hand-painted pilot doll
* Accessories, small parts, illustrated instructions
Technical data:
Wingspan = 1650mm
Length = 1100mm
Weight = 2300~2800g
R/C functions = rudder, elevator, ailerons, motor
Required accessories (not included):
Brushless motor: Outrunner, d: 36, from 600W, approx. 800 - 1000KV, approx. 180-220g
Brushless controller: from 55A (depending on motor)
Propeller: 12x6" - 13x6" (depending on motor/controller)
Servos: 4x 12mm, from 3.0kg (optional +1x throttle servo when installing a combustion engine)
Battery: Lipo 3s-4s 3000 - 4000mAh Combo BOOST 40 V2, # C9109
Remote control with 6 channels
Charger
Various DIY tools
Optional - recommended combustion engines:
Petrol engines from 10 cc
Glow ignition engine 2-stroke: 7.5 - 10 cc
Glow ignition engine 4-stroke: 11 - 15 cc
Optional accessories (not included):
Float set # 33C9275
Suitable for: advanced pilots
