Details
Brushless controller B-80 80A 2-6s Lipo - Pulsar
NEW! With forward/backward function (switchable via transmitter)
PULSAR controllers impress with their high quality, performance and reliability. They fit perfectly with all commercially available brushless motors (outer rotor or inner rotor). Either LiPo, NiMH or NiCD batteries can be used as batteries. The number of cells is automatically recognized by the controller. Thanks to the use of modern, high-quality SMD components, the internal resistance of the controller is particularly low. The high clock frequency enables high-resolution and sensitive control behavior.
Highly flexible and temperature-resistant silicone cables underline the high quality.
Technical data:
Cell number = 2 -6 LiPo / 5- 18 NiMH/NiCD
Load (duration) = 80A
Load (short-term) = 100A
Integrated receiver power supply (BEC) = 5V/6V / 8A
Weight = 105g including all cables and plugs
Dimensions = 90x37x12mm
Adjustable functions:
- Brake (off / soft / medium / hard)
- Motor rotation direction (forward / reverse)
- Battery type (LiPo / NiMH / NiCD)
- Shutdown mode engine running (reduced power = 70%, OFF)
- Shutdown voltage for LiPo (3.0V / 3.2V / 3.4V / 3.6V)
- Cut-off voltage for NiMH / NiCD (50% / 60%)
- Start behavior (standard / soft / very soft)
- Timing (AUTO / low 5° / medium 15° / high 25°)
- SMR function (ON/OFF)
- SR function (on/off)
- BEC adjustable (5V or 6V, default = 5V)
Product features:
- Ready assembled with yellow XT90 connector and 4.0mm gold connectors (no soldering required)
- 32 bit processor
- Extremely sensitive control behavior
- Selected, high-quality MOSFET transistors
- Powerful, integrated BEC receiver power supply
- Easy to set with optional programming box
- Completely preset at the factory
- Proven top quality
- Maximum reliability
Special accessories (recommended)
Program Box #3315966
