Details
Triple Neo R.E.S. - KIT - 193cm - Aeronaut
The successful TRIPLE models have been expanded with a new version of the fuselage construction and now offer even more options for combining fuselage and wings.
The fuselage of the Triple Neo consists of a GRP fuselage boat and a carbon fiber tube that serves as a tail boom.
Optionally, each model can be built as a glider or electric glider. A special template is included for this purpose, with which the tip of the fuselage can be easily removed.
Engine camber and side pull are automatically set correctly.
The wings are built using rib construction, have continuous pine spars and boxing with grooves so that assembly on any level building board is quick and easy.
The trailing edge planking is also grooved so that nothing can go wrong with the position of the ribs.
This also enables beginners in wooden model building to quickly create their own perfectly built and well-flying model.
The wings are made of lasered wooden parts. All parts are precisely cut and require little reworking.
Due to the simple and precise construction, model-relevant values such as V-shape or EWD are set automatically and do not have to be adjusted manually.
All optionally available wings can be attached to the fuselage as desired, without any tools but with strong magnet security.
So a quick change is also possible on the airfield.
"Triple Neo R.E.S." is only controlled via rudder, elevator and spoilers.
The model kit contains all the laser-cut wooden parts for constructing the wings and tail units, white fiberglass fuselage and white canopy, the well-known aero-naut slipway, pine spars, rudder linkages and Bowden cables, various small parts. Detailed illustrated building instructions in the proven aero-naut 3D style lead to quick building success. A suitable spinner and center piece for folding propellers are also included in the kit. The clamping cone depending on the motor shaft is also required.
Technical specifications:
Span [mm] 1930
Length [mm] 1200
Weight [g] approx. 870
Wing area [dm²] 36.3
RC functions elevator, rudder, airbrakes (optional: motor control)
For completion you need (not included):
- Brushless motor (d: approx. 36 mm, approx. 100 - 130g, approx. 700-950 KV)
- Brushless ESC min. 30A
Propeller (size depending on motor-lipo setup)
4 servos (approx. 12 - 17 g)
- Lipo battery (3s, 1800 mAh)
Remote control with at least 4 channels
div. craft tool
2m covering foil, varnishes
Recommended for the advanced model maker and pilot.
