Details
Nemesis KIT 640 mm Solidpor - Graupner
This "NEMESIS" pylon racing model impresses with its typically high flight speed and precise control behavior.
The CFRP spar foamed into the wing as standard gives the model above-average strength.
The model is made of high-quality SOLIDPOR® hard foam in Germany, is very robust and has a
very good suitability for everyday use.
kit content:
Kit with finished parts made of high-strength SOLIDPOR®
Wing with foamed CFRP spar
Kit including CAM SPEED PROP and precision spinner
Hull cover with magnetic quick-release fastener
Detailed assembly instructions with construction stage photos
Due to the high speed, the model is not suitable for children under the age of 16 (Operation under the age of 16 requires parental guidance).
1:10 scale semi-scale model
Information about the original aircraft:
Form One Gold Race Winner
Pilot and designer Jon Sharp wins the Reno Air Race six times with the NEMESIS.
The NEMESIS holds the Formula I aircraft speed record at 255.257 MPH
RC functions
aileron
elevator
engine speed
Technical specifications
Wing area approx.: 7.3 dm²
Approx. weight: 300 g
Total area approx.: 8.6 dm²
Tailplane volume: 1.3 dm²
Length approx.: 565 mm
Drive: electric
Span approx.: 640 mm
Wing loading: 35 g/dm²
Required accessories - not included:
1x brushless motor max. d: 28 mm min. 1500 KV
1x Lipo battery - depending on the engine - 2-3S Lipo 800 - 1000 mAh min. 25C
1x controller, brushless, min. 30A
Propeller 4.7 x 4"' - 5.5 x 4.5" (depending on motor and battery)
Spinner diameter: 20-25 mm
3x servos 8-13g (MG recommended for very powerful drive design)
Remote control with at least 4 channels
Also: Superglue, handicraft tools, etc.
NOTE: the experienced model builder can also build this model ULTRA-LIGHT and then comes with 15-25g motor, 6g servos and 400mAh battery to less than 250g - thus also suitable for the hall.
Suitable for the advanced model maker and pilot.
