Details
UHU Endfest 90 2K Epoxy glue 2 x 15ml
2-component epoxy resin adhesive: a solvent-free, two-component epoxy resin-based adhesive for extreme loads. The working time is up to 120 minutes. UHU plus endfest 90min is extremely versatile, especially when the joint must withstand extreme loads. The mixing ratio is usually 1:1 binder and hardener (by volume). After mixing, there is a limited time – the pot life – for processing the adhesive. In addition to a high final strength (up to 3000 N/cm²), the bond is characterized by very high impact resistance, aging resistance, and moisture resistance.
- Two-component epoxy resin-based adhesive for extreme loads.
- Mixing ratio binder: hardener = 1:1 by volume.
- Working time (pot life) approx. 90 minutes.
- Curing time and final strength depend on temperature.
- The bond is impact-resistant and resistant to aging and moisture.
Processing
The surfaces to be bonded must be dry, dust-free, and grease-free. Roughen smooth surfaces. Mix the binder and hardener in a 1:1 ratio (equal strands). Apply the adhesive to one side or to both sides for rough materials. Join the parts together without pressing. Please observe the safety instructions in the technical data sheet and safety data sheet.
Additional Information
EAN 4026700456707
Suitable Materials: Metal, stone, concrete, porcelain, wood, glass, and many plastics
Unsuitable Materials: Polyethylene, polypropylene, Teflon®, polystyrene, soft PVC
Load Capacity: Low, High, Medium
Resistance: Gasoline, alkali, oil, acid, water
Temperature Range: -40°C to +100°C (depending on material and construction - higher temperatures are also possible. Please refer to the technical data sheet for details)
Contents: Tube of binder (18g/15ml) and tube of hardener (15g/15ml), as well as a mixing tray with a spatula
Chemical Base: Epoxy resin
Viscosity: High viscosity, medium viscosity
Pot life: Approx. 90 minutes (at room temperature)
Adhesive Technique: Wet bonding
