Details
Sound module - gas motor (small) with horn - Krick
Every time the microswitch is pressed, the programmed original sound is heard from the loudspeaker for 8-12 seconds.
The system contains an on/off switch, a microswitch for a servo (not included) and an amplifier for the loudspeaker. The sound module is wired ready for connection. A 9V block battery can be used as the power supply or the drive battery of 7.2 - 9.6V.
Scope of delivery
Sound module fully wired with 9V battery connection, on/off switch, loudspeaker and micro switch for switching on the sound.
Optionally, the cardboard box can be used as a resonance body for the loudspeaker
Instructions in German
Required accessories (not included):
9V battery or other direct current source 7.2-9.6 V
Servo for operating the microswitch.
Alternative to the microswitch: RC switching electronics - can be switched directly from the remote control.
Technical data:
Input voltage: 7.2 - 9.6V
Speaker 50 mm Ø
Weight approx. 75 g
Dimensions of electronic board approx. 24 x 51 mm
Cable length from electronic board approx. 30 cm
