Aktivátor Spray 200 ml - Everglue

Aktivátor Spray 200 ml - Everglue

Curing Accelerator
The activator is suitable for all cyanoacrylate-based
superglues. The aerosol was designed for
rapid curing of large adhesive layers, bonding
inactive materials, or under otherwise unfavorable
processing conditions, such as dry air or
cold temperatures. The activator is suitable for use with Styrofoam and Styrodur, as well as all rigid foams used in model making, such as Arcel, Elapor, Solidpor, Hypodur, Z-Foam, Depron, Selitron, EPO, EPP, and EPS.

Processing
The recommended processing temperature is +10 °C to +30 °C. Shake the can briefly before use. To achieve a smooth
surface, a sufficient spray distance of approx. 30 cm should be maintained.

There are two possible applications:
Before bonding: Apply the spray to one side, allow it to dry briefly, and then apply the superglue to the untreated surface. Then quickly join the parts together and allow the adhesive to cure.

After bonding: Spray the adhesive directly and allow it to cure.

Properties
• Colorless/transparent
• For instant curing of cyanoacrylate bonds
• Reduces blooming at the bond line

Note:
Use only in a well-ventilated area.
Read and follow the hazard warnings on the packaging BEFORE use.