Details
Cumul wood KIT free-flight 1130 mm - KAVAN
The Mini Cumul is an all-balsa glider with a 1130mm wingspan made from laser-cut parts.
The ideal introduction to familiarizing yourself with the construction of aircraft models.
Thanks to the precisely laser-cut parts, you don't spend a lot of time grinding and cutting, but you can quickly work your way to the goal - the finished aircraft.
We recommend UHU HART as the glue; you will also need a few pins.
The fuselage is formed by a carbon tube tailplane and a nacelle.
The hull offers enough space not only for ballast (set up as a free-flight glider), but also for a miniature RC system.
The wing is constructed from pre-cut and sanded balsa parts and attached to the fuselage with rubber rings.
The design of the model offers the possibility of installing a miniature RC system - CUMUL mini can then fly like a pure glider with controllable rudder and elevator, or you can use it with a small one, in the bow or on the pylon above the wing placed brushless motor.
Construction kit contains: laser-cut fuselage, wings and tail surfaces, carbon tail beam, small parts accessories, construction plan/construction instructions.
The design includes the possibility of installing a miniature receiver and two servos to control the vertical and horizontal stabilizers.
The model can also be motorized by a small brushless electric motor in the fuselage or on a pylon above the wing.
Technical data:
Wingspan [mm] 1130
Length [mm] 847
Weight [g] 160 (free-flight model) or 220-240g as an RC glider
Controllable functions None (optional: rudder, elevator and if necessary motor control)
Construction effort: easy (beginners)
Flying experience: not necessary - beginner
Construction kit contains:
laser-cut fuselage, wings and tail surfaces, carbon tail beam, small parts accessories, construction plan/construction instructions.
You also need (not included in the kit):
Adhesives (Uhu hard, balsa superglue), colors according to your own ideas
To set up an RC glider you still need:
2 servos (4-6g)
1 micro receiver + remote control
1 battery (1s Lipo, 250-500 mAh)
Optional: Brushless outrunner motor with approx. 15g + ESC 3-7A + propeller
