Details
Falcon 12 6-channel GYRO receiver - HOTT Graupner
With the Falcon 12, Graupner presents a powerful 6-channel receiver with integrated 3-axis gyro and 3-axis acceleration sensor (A-meter).
With the GRAUPNER HoTT 2.4GHz technology, the receiver has a safe hopping telemetry transmission high-frequency part with high-quality components and state-of-the-art software. The receiver transmits the parameters “receiver voltage”, “receiver temperature” and “signal strength” to the transmitter without additional sensors.
The new antenna amplifier ensures a greater range despite the single antenna. The faster 32-bit L4 processor is a guarantee for energy-saving work and the higher performance ensures that the Falcon 12 can also be used as a flybarless system for helicopters and as a flight controller for multicopters. Of course, the integrated Falcon gyro system can also be used perfectly for surface models. There are different gyro modes: OFF, normal stabilization, heading lock and turn rate mode, which ensures particularly easy knife flight and easy torquing and supports the pilot. Extremely quick, easy and convenient to set via the Hott transmitter telemetry menu.
Just like its namesake, the Falcon, the Falcon 12 embodies determination, power and precision. Hunt for the perfect flight with the Falcon.
Surface models
Stabilization of the flight model in difficult wind conditions for up to 3 axes
Natural flight behavior thanks to proportional gyro suppression
Thanks to the 3-axis gyro, even difficult-to-control aerobatic models can be flown very well and aerobatics are extremely simplified
Flight maneuvers can be flown much more cleanly
3 different gyro modes: OFF, normal stabilization, heading lock and turn rate mode for particularly easy knife flight and easy torquing
Easy to set gyro assignment
Setting the parameters via HoTT telemetry
Software with attitude mode available for the HoTTrigger 1400 and V-Venture, enables easy landings even in difficult wind conditions
Flybarless system for helicopters
Basic setting carried out in just a few minutes
Fast and innovative axis assignment resulting in flexible installation direction
Extremely space-saving due to size, weight and no cables, making it easy to store
Especially vibration-insensitive 3-axis sensors of the latest generation
Pirouette optimization of the swashplate and direction of tail torque compensation are automatically recognized
All common helicopter swashplates 90/120/135/140 degrees
Adjustable swashplate rotation up to 90 degrees for multi-blade heads
Clear standard and expert menu that can be selected if required
Sensitivity parameters during flight can also be adjusted via encoder depending on the speed and style of flight depending on the flight phase
Super fast by eliminating the transfer time from the receiver to the Flybarless system
Very direct control feel
Flight control for copters
The Q06 copter software is installed on the receiver via a software update
Basic setting carried out in a few minutes via the telemetry menu
Fast and innovative axis assignment resulting in flexible installation direction
Especially vibration-insensitive 3-axis sensors of the latest generation
The housing protects the electronics in crashes. The special double-sided adhesive tape also dampens the vibrations.
8kHz gyro frequency, multishot and fast PID control routines as well as new software filters ensure a perfect flight experience.
Also new is the Quadrotyp XI (quadcopter
so that the lens remains free and the props rotate away from the obstacle.
When the GPS sensor S8437 is connected to K5/telemetry and the K5 is set to SENSOR, the additional functions: GPS hold with altitude hold, come home and fly waypoints (with HoTT Viewer 2 app and USB-OTG cable) are available.
Telemetry support from your own Hott sensors and Hott sensors from other providers
SUMD output for other flybarless receivers.
Voltage input for external Voltage divider, e.g. B. already included in the controllers S3082 and S3083.
HV suitable. Input voltage range 3.6...12.6 V
Can be programmed and operated with all previously available HoTT transmitters with telemetry
Flybarless for helicopters
Easy programming of the basic settings via telemetry.
The pirouette optimization is automatically determined from the parameters and works extremely well.
Extreme flight stability with full 3D suitability even with the basic settings.
Effect for tail and swashplate can be easily adjusted via the telemetry menu or via selectable transmitters.
Further optimization options in expert mode for your personal flying style and personal concerns.
Extremely easy adjustment of the basic settings via telemetry:
Rotor rotation direction
Swashplate type
Swashplate frequency 50...200 Hz
Swashplates
