Details
DPSI Micro DualBat 5.5V/5.9V 2xMPX -> 2xMPX - Power Supply
Compact dual power supply with magnetic switch and selectable output voltage. Suitable for 5/6-cell NiCd/NiMH as well as LiIon/LiPo and LiFePO4 batteries. Regulated and stabilized output voltage 5.9V or 7.2V adjustable.
Double electronic on/off switch for contactless switching with an external magnet from the outside.
The battery type used and the corresponding undervoltage detection can be programmed. Intelligent voltage monitoring with visual error display.
Intended for 5 to max. 10 servos. Can handle 4A (@5.9V) continuous current and 25A peak current.
connections
2 MPX battery connection cables with flexible silicone wire 0.5mm² cross section.
Double MPX connections on the output side with silicone wire 0.5mm² cross section.
All connectors are gold-plated (FCI contacts).
scope of delivery
1 battery switch DPSI Micro DualBat, switching magnet with hacker patch, 1 vibration protection rubber, 2 washers, 1 drilling template and 1 quick guide.
Safety notice:
The DPSI is switched off using a Hall sensor. Hall sensors react to magnetic fields. In the case of very strong magnetic fields (e.g. electric drive), the DPSI may switch off under certain circumstances. Current cables create a magnetic field. Please route all cables that carry a very high current (>100A) past the DPSI at a distance of at least 3cm.
Technical data
Power sources 5 to 7 cell NiCd / NiMH batteries, 2 cell LiIon, LiPo, LiFePO4 batteries
Operating voltage range 4.8V to 12V
Rated input voltage 6.0V to 8.4V
Output voltage 5.5V or 5.9V adjustable via slide switch
Quiescent current (switched off) <1µA per battery
Quiescent current (switched on) approx. 90mA total (LED on)
Max. continuous current @ 5.9V 4A
Max peak current @ 5.9V 10A
Maximum power loss (duration) 8W
Ambient conditions -10°C to +50°C
CE test according to 2004/108/EC
Dimensions 73.4mm x 19.4mm x 14.1mm
Weight 34g
