Details
Skyliner ARF 1990 mm - Aeronaut
Skyliner is an ARF model ideal for the advanced beginner and hobby pilot. The kit includes a high-quality GRP fuselage, GRP-reinforced balsa/foam wings and a balsa tail plane. Wings, tailplane and rudder are covered with Oracover. You just install servos, otor and RC equipment and the model is ready to fly. Servo trays are included in the kit.
Skyliner can be build with or without motor. The fuselage is marked to be cut off where the spinner fits best, if a motor is to be installed.
With a wing span of 2 meters the model is well suited for slope soaring and also for contest flying in one of the established model flying associations.
Skyliner is not a dedicated thermal soarer; the specially designed wing section makes the model reasonably fast and agile, so that you will enjoy many hours of flying under almost any conditions.
The kit contains:
White GRP-fulselage, covere wings and tailplane, servo tray, control linkages, canopy, small parts, decals, building instructions.
Specifications:
Wingspan [mm] 1.990
Length [mm] 1.150
Weight [g] 1.500
Wing profile SD7037
RC-functions: elevator, rudder, ailerons (2 servos), optional: motor
Recommended accessories - not included:
Remote controll set with min. 4/5 channels incl. receiver
Motor: brushless Outrunner, as of 250W, d: 28 mm, 1000-1300 kv
Controller: brushless, as of 30A
Battery: 3s Lipo, 1800 - 2600 mAh
Folding Propeller: depending on motor choice approx. 9x5" - 10x6"
CN-Spinner: d: 40 mm
Center piece: 42 mm
Servos: 4x 10-12mm approx. 12 - 19g
Spare parts & accessories
