Brushed Motor Controller RACE-Control Navy 10A - 3,4-8,4V - Aeronaut

Brushed Motor Controller RACE-Control Navy 10A - 3,4-8,4V - Aeronaut

Race-Control is a controller for brushed motors.
The controller can be used in boats with electric motors up to a power of 10 A. Due to its compact size, it is also suitable for small models with little space in the fuselage. The controller is programmed for forward-stop-reverse. An XT-60 plug is soldered to the battery connection. The motor is soldered directly to the connection cable. It works in the optimal voltage range of 1-2S LiPo batteries or 6 V lead-acid batteries. The BEC delivers a maximum of 6 V, but also works with lower operating voltages of the drive battery. Here the output of the BEC is approx. 0.3-0.4 V below the operating voltage (e.g. drive battery 4.8 V = BEC approx. 4.5 V)

Technical specifications:

Operating voltage 3.4 - 8.4 V
Max Current 10A
BEC max 6V
BEC Current 0.5A
Dimensions approx. 26x23x9 mm
Weight with cable + plug approx. 11 g
Lipo Under Voltage Shutdown: NO
Battery connector: yes - XT-60
Motor connector: no

Warning: when operating with Lipo batteries, make sure that the batteries are not over-discharged - this can destroy the battery.