Details
Ercoupe EP lasercut wood KIT - 914 mm - Dumas Aircraft
he original ERCO Ercoupe is a light, single-engine, two-seater touring aircraft made by the US manufacturer ERCO. The model was designed by Pat Tritle and can be equipped with either a geared brush motor or a brushless motor. The kit contains over 130 laser-cut wooden parts.
Features of the DUMAS construction kit:
* Lasered frames and ribs
* The balsa wood in the kit was selected by hand
* Construction plan in the original size of the model
* Step-by-step assembly instructions included
* Bonnet made of thermoformed plastic
* Gray covering paper included in the kit
The assembly requires some experience - a beginner should build this kit together with an experienced model builder.
The flight characteristics are very forgiving and can be easily mastered by an advanced pilot. Planned control functions: elevator, rudder and motor control. Depending on building experience, ailerons can also be retrofitted.
Scope of delivery:
Laser-cut frames and ribs, wooden strips, bonnet, wheels, window material with templates, covering paper, building plan (2 sheets in 1:1 scale) and step-by-step building instructions.
ATTENTION: Building instructions only in English!!!!
Technical specifications
Span 914mm
Total length 632mm
Area 13.9 square meters
To finish you still need:
1x brushless motor, approx. 40-60 g, max. d: 28 mm
1x brushless controller, from 20A, 2-3s Lipo
Lipo battery - 2-3s, 800-1300mAh (depending on motor & propeller combination)
2 servos each 8-12g (2 additional servos for aileron)
Remote control (transmitter & receiver with at least 4 channels)
Covering material (foil or paper)
As an adhesive we recommend white glue (alternatively also Uhu hard and superglue)
div. craft tool
Pictures are sample pictures - the kit does NOT contain any decoration material!!!
Recommended for the advanced model builder and pilot.
