Challenger Indoor 85 cm KIT - Multiplex

Challenger Indoor 85 cm KIT - Multiplex

The MULTIPLEX Challenger is the perfect introduction to the world of 3D aerobatics. The two large wings and the high hull allow low airspeed in all flight attitudes. The large rudder surfaces provide the required maneuverability. Thus, it is equally suitable for beginners and professionals alike. A "must have" for all biplane and 3D aerobatic fans. The EPP model is very robust and forgives almost every mistake. All imaginable aerobatics are possible with the model.

TECHNICAL SPECIFICATIONS

Model type: 3D / indoor
Material: EPP
Span in mm: 850
RC functions: 4 channels - rudder / ailerons / elevator / motor
Weight in grams: approx. 225
Flight time in minutes: approx. 5
Battery types / cells: 2 - 3S LiPo (depending on motor)
Construction time in minutes: 300


Necessary accessories (NOT INCLUDED):

2x 4-6g servos (e.g., Hitec HS-40) for rudder and elevator
1x 8-10g servo (e.g., Hitec HS-55 or HB-65) for ailerons
Engine: about 15-20g brushless outrunner d: 28mm, 1000-1200 kv
Prop: GWS 9x3.8 - 9x4.7
Regulator: brushless, 2-3s, 12 - 18 A
Battery: Lipo 2-3s, about 300 - 400 mAh
Remote control with at least 4 channels

Adhesive (superglue), craft knife, div. Tool