Details
Lentus - KIT - 3000 mm - Multiplex
LENTUS - the most powerful ELAPOR foam glider model of all time!
The model is designed as a club glider with a focus on thermal and slope soaring.
We have implemented a lot of innovative ideas in the Lentus. The model is standard for operation with 6 servos for elevator and rudder, ailerons and flaps
designed. By installing the optionally available retractable landing gear, the model can be self-launched in conjunction with a 4S 2600 battery and an 8x6" propeller.
As a further option, it is possible to activate the prepared tow release, despite the built-in electric motor and chassis!
This option offers maximum flying fun, making the Lentus the safest model for learning aero tow, as it can be released immediately in a critical situation and the model safely brought back to the starting point with the electric motor. Due to the modern profile design, the model achieves a very large
power spectrum and allows a dynamic flight style. The 4-flap surfaces enable precise landings (butterfly).
Features:
Very good-natured circling characteristics for safe thermal flying
Prototypical look of modern gliders
Clear canopy with detailed cockpit
Option: FES option (Front Electric Selflaunch) with optional retractable landing gear, 4S drive (4S 2600) and 8x6 propeller - this makes the model self-launching
Option: Prepared tow hitch (can also be used with the electric version)
Option: TEK Vario installation prepared (display of flight speed and Vario measurement data)
Stable, complex wing with double CFRP-ALU composite spars
Forced plugging of the servo contacts with M6 high-current connectors in the wings
Detachable rudder with groove hinges
Extremely stiff hull in M-Space technology with Ø20mm profile tube
Rudder flaps reinforced with stainless steel tubes
Generous, structured interior for battery, RC and telemetry
High-quality printed and plotted decor
Landing protection skid made of stable protective film
Leading edge protection integrated in the decor
Technical specifications:
Span (mm): 3000
Flight weight approx. (g): 2300-2600
Length (mm): 1410
scope of delivery
ELAPOR® foam molded parts for fuselage, wings, tail unit and cabin frame
Clear Canopy
CFRP-ALU spar
all plastic, small and linkage parts required for assembly
Spinner, driver, collet, decal sheet
Multilingual assembly instructions
To complete the following are required:
6x servos (9 - 13g) e.g.: Hitec HS-65HB (optionally a 7th servo for the tow release)
Motor: Brushless Outrunner: max. d: 36 mm, 800 - 1000KV, 3-4s, 160-180g (e.g. ROXXY BL-O C35-48-990)
Controller: brushless min. 50 - 60A (depending on motor/battery/propeller) with integrated BEC (min. 3A)
Folding propeller: 11 x 6" - 12 x 6" - Attention: for 4s operation: 8 x 6"
Servo extension cables: 2x 100 cm, 2x 60 cm, 2x 45 cm, 4x 15 cm
Battery: Lipo 3s 2500 - 3000mAh, min. 25A (optional for ground launches with retractable gear: 4s, 2500 - 3000mAh)
For construction is required
Superglue (thin and medium)
activator
div. craft tools
Suitable for the advanced pilot.
